Philips DJ Equipment HTL2111A User Manual

Always there to help you  
Register your product and get support at  
Question?  
Contact  
Philips  
HTL2111A  
User manual  
 
Never insert objects into the ventilation  
slots or other openings on the product.  
Where the mains plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Disconnect the product from the power  
outlet before lightning storms.  
When you disconnect the power cord,  
always pull the plug, never the cable.  
1 Important  
Read and understand all instructions before you  
use your product. If damage is caused by failure  
to follow instructions, the warranty does not  
apply.  
Risk of short circuit or fire!  
Help and support  
Before you connect the product to the  
power outlet, ensure that the power  
voltage matches the value printed on the  
back or bottom of the product. Never  
connect the product to the power outlet if  
the voltage is different.  
com/support to:  
download the user manual and the quick  
start guide  
watch video tutorials (available only for  
selected models)  
find answers to frequently answered  
questions (FAQs)  
Risk of injury or damage to this product!  
Never place the product or any objects  
on power cords or on other electrical  
equipment.  
email us a question  
chat with our support representative.  
If the product is transported in  
temperatures below 5°C, unpack the  
product and wait until its temperature  
matches room temperature before  
connecting it to the power outlet.  
Parts of this product can be made of  
glass. Handle with care to avoid injury and  
damage.  
Follow the instructions on the website to select  
your language, and then enter your product  
model number.  
Alternatively, you can contact Consumer Care  
in your country. Before you contact, note down  
the model number and serial number of your  
product.You can find this information on the  
back or bottom of your product.  
Risk of overheating!  
Never install this product in a confined  
space.Always leave a space of at least four  
inches around the product for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on the product.  
Safety  
Risk of electric shock or fire!  
Risk of contamination!  
Never expose the product and accessories  
to rain or water. Never place liquid  
containers, such as vases, near the product.  
If liquids are spilt on or into the product,  
disconnect it from the power outlet  
immediately. Contact Consumer Care to  
have the product checked before use.  
Never place the product and accessories  
near naked flames or other heat sources,  
including direct sunlight.  
Do not mix batteries (old and new or  
carbon and alkaine, etc.).  
Danger of explosion if batteries are  
incorrectly replaced. Replace only with the  
same or equivalent type.  
Remove batteries if they are exhausted or  
if the remote control is not to be used for  
a long time.  
Batteries contain chemical substances, they  
should be disposed of properly.  
2
EN  
 
Risk of swallowing batteries!  
The product/remote control may contain  
a coin/button type battery, which can be  
swallowed. Keep the battery out of reach  
of children at all times! If swallowed, the  
battery can cause serious injury or death.  
Severe internal burns can occur within two  
hours of ingestion.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC. Please inform yourself about the local  
separate collection system for electrical and  
electronic products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
If you suspect that a battery has been  
swallowed or placed inside any part of the  
body, seek immediate medical attention.  
When you change the batteries, always  
keep all new and used batteries out of  
reach of children. Ensure that the battery  
compartment is completely secure after  
you replace the battery.  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
If the battery compartment cannot be  
completely secured, discontinue use of the  
product. Keep out of reach of children and  
contact the manufacturer.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed with normal household waste.  
Please inform yourself about the local rules  
on separate collection of batteries because  
correct disposal helps to prevent negative  
consequences for the environmental and  
human health.  
This is CLASS II apparatus with double  
insulation, and no protective earth provided.  
Care for your product  
Compliance  
Use only microfiber cloth to clean the product.  
Care of the environment  
This product complies with the radio  
interference requirements of the European  
Community.  
Hereby,WOOX Innovations declares that this  
product is in compliance with the essential  
requirements and other relevant provisions  
of Directive 1999/5/EC.You can find the  
com.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
EN  
3
 
Trademarks  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
The Bluetooth word mark and logos are  
registered trademarks owned by Bluetooth  
SIG, Inc. and any use of such marks by WOOX  
Innovations is under license. Other trademarks  
and trade names are those of their respective  
owners.  
4
EN  
 
2 Your SoundBar  
Remote control  
This section includes an overview of the  
remote control.  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from  
the support that Philips offers, register your  
a
b
Main unit  
This section includes an overview of the main  
unit.  
g
f
c
d
a
b
a SURR indicator  
e
Lights up when you selectVirtual Surround  
sound.  
b Source indicators  
OPTICAL: Lights up when you switch  
to optical input source.  
AUX: Lights up when you switch to  
analog input source.  
COAXIAL / AUDIO IN  
Lights up when you switch to coaxial  
input source.  
Lights up when you switch to audio  
input source (3.5mm jack).  
Bluetooth  
a
(Standby-On)  
Switch the SoundBar on or to standby.  
Lights up when you switch to  
Bluetooth mode and Bluetooth devices  
are paired.  
Blinks when you switch to Bluetooth  
mode and Bluetooth devices are not  
paired.  
b Source buttons  
AUX: Switch your audio source to the  
AUX connection.  
USB: Switch your audio source to the  
USB connection.  
COAX: Switch your audio source to  
the coaxial connection.  
EN  
5
 
AUDIO-IN: Switch your audio source  
to audio in connection.  
Bluetooth: Switch to Bluetooth  
mode.  
OPTICAL: Switch your audio source  
to the optical connection.  
Rear connectors  
c TREBLE +/-  
Increase or decrease treble.  
d SURR  
Toggle between stereo and virtual  
surround sound.  
e
a
b c  
d
Mute or restore volume.  
f BASS +/-  
Increase or decrease bass.  
a AUDIO IN-AUX  
Connect to an analog audio output on the  
TV or an analog device.  
g VOLUME +/-  
Increase or decrease volume.  
b DIGITAL IN-OPTICAL  
Connect to an optical audio output on the  
TV or a digital device.  
Connectors  
c DIGITAL IN-COAXIAL  
Connect to a coaxial audio output on the  
TV or a digital device.  
This section includes an overview of the  
connectors available on your SoundBar.  
d AC MAINS~  
Side right  
Connect to the power supply.  
a
b
a
(USB)  
Audio input from a USB storage device.  
b AUDIO IN  
Audio input from an MP3 player (3.5mm  
jack).  
6
EN  
 
3 Connect  
Connect audio fromTV and  
other devices  
This section helps you connect your SoundBar  
to aTV and other devices.  
For information about the basic connections of  
your SoundBar and accessories, see the quick  
start guide.  
Play audio fromTV or other devices through  
your Soundbar.  
Use the best quality connection available on  
yourTV and other devices.  
Option 1: Connect audio through a  
digital optical cable  
Note  
For identification and supply ratings, refer to the type  
plate at the back or bottom of the product.  
Best quality audio  
Before you make or change any connections, make sure  
that all devices are disconnected from the power outlet.  
TV  
Placement  
Place your Soundbar as shown below.  
1 Using an optical cable, connect the  
OPTICAL connector on your SoundBar to  
the OPTICAL OUT connector on theTV  
or other device.  
The digital optical connector might be  
labeled SPDIF or SPDIF OUT.  
Option 2: Connect audio through a  
digital coaxial cable  
Good quality audio  
1 Using a coaxial cable, connect the  
COAXIAL connector on your SoundBar  
to the COAXIAL/DIGITAL OUT  
connector on theTV or other device.  
EN  
7
 
The digital coaxial connector might be  
labeled DIGITAL AUDIO OUT.  
Option 3: Connect audio through  
analog audio cables  
Basic quality audio  
1 Using an analog cable, connect the AUX  
connectors on your SoundBar to the  
AUDIO OUT connectors on theTV or  
other device.  
DVD  
8
EN  
 
Equalizer  
4 Use your  
SoundBar  
Change the high frequency (treble) and low  
frequency (bass) settings of the SoundBar.  
1 Press TREBLE +/- or BASS +/- to change  
the frequency.  
This section helps you use the SoundBar to play  
audio from connected devices.  
Before you start  
» All Source indicators on the main unit  
blink twice when treble or bass is set  
to the maximum or minimum value.  
Make the necessary connections described  
in the Quick Start Guide or download  
support.  
MP3 player  
Switch the SoundBar to the correct source  
for other devices.  
Connect your MP3 player to play your audio  
files or music.  
What you need  
An MP3 player.  
A 3.5mm stereo audio cable.  
Adjust the volume  
1 Using the 3.5mm stereo audio cable,  
connect the MP3 player to the AUDIO IN  
connector on your SoundBar.  
1 Press VOLUME +/- to increase or  
decrease a volume level.  
To mute sound, press (MUTE).  
To restore the sound, press (MUTE)  
again or press VOLUME +/-.  
2 Press AUDIO-IN.  
3 Press the buttons on the MP3 player to  
» All Source indicators on the main unit  
blink twice when a volume is set to the  
maximum or minimum value.  
select and play audio files or music.  
USB storage devices  
Choose your sound  
Enjoy audio on a USB storage device, such as an  
MP3 player and USB flash memory, etc.  
What you need  
This section helps you choose the ideal sound  
for your video or music.  
A USB storage device that is formatted  
for FAT file systems, and complies with the  
Mass Storage Class.  
Surround sound mode  
An MP3 or WMA file on a USB storage  
device  
Experience an immersive audio experience with  
surround sound modes.  
1 Connect a USB storage device to the  
1 Press SURR to turn surround mode on  
SoundBar.  
or off.  
2 Press USB on the remote control.  
On: Create a surround listening  
experience.  
» The play starts after a few seconds.  
Off:Two-channel stereo sound. Ideal  
for listening to music.  
EN  
9
 
user manual of the Bluetooth device on  
how to enable Bluetooth).  
Note  
When prompted for a password, enter  
"0000".  
This product may not be compatible with certain types  
of USB storage device.  
If you use a USB extension cable, USB HUB, or USB  
multi-reader, the USB storage device may not be  
recognized.  
» During connection, the Bluetooth  
indicator blinks at a lower rate.  
Digital camera PTP protocols are not supported.  
Do not remove the USB storage device while it is  
being read.  
DRM-protected music files (MP3,WMA) are not  
supported.  
3 Wait until the Bluetooth lights up.  
» If the connection fails, the Bluetooth  
indicator blinks continually at a lower  
rate.  
Support a USB port: 5V , 500mA.  
4
Select and play audio files or music on  
your Bluetooth device.  
During play, if a call is coming, music  
play is paused. Play resumes when the  
call ends.  
Auto standby  
5 To exit Bluetooth, select other source.  
When playing media from a connected device,  
the SoundBar automatically switches to standby  
if:  
When your switch back to Bluetooth  
mode, Bluetooth connection remains  
active.  
no button is pressed for 30 minutes, and  
no audio play from a connected device.  
Note  
The music streaming may be interrupted by obstacles  
between the device and SoundBar, such as wall, metallic  
casing that covers the device, or other devices nearby  
that operate in the same frequency.  
If you want to connect your SoundBar with another  
Bluetooth device, disable the currently connected  
Bluetooth device.  
Play audio through Bluetooth  
Through Bluetooth, connect the SoundBar with  
your Bluetooth device (such as an iPad, iPhone,  
iPod touch,Android phone, or laptop), and then  
you can listen to the audio files stored on the  
device through your SoundBar speakers.  
What you need  
A Bluetooth device which supports  
Bluetooth profile A2DP, and with Bluetooth  
version as 2.1 + EDR.  
The operational range between the  
SoundBar and a Bluetooth device is  
approximately 10 meters (30 feet).  
Apply factory settings  
You can reset your SoundBar to the default  
setting mode.  
1 In mute mode, quickly press AUX twice.  
» The factory settings is restored.  
1 Press Bluetooth on the remote control  
to switch the SoundBar to Bluetooth  
mode.  
» The Bluetooth indicator blinks at a fast  
rate.  
2 On the Bluetooth device, switch on  
Bluetooth, search for and select PHILIPS  
HTL2111A to start connection (see the  
10 EN  
 
 
5 Wall mount  
Note  
Improper wall mounting may result in accident, injury or  
damage. If you have any query, contact Consumer Care  
in your country.  
Before wall mounting, make sure the wall can support  
the weight of your SoundBar.  
Screw length/diameter  
Depending on the type of wall mounting your  
SoundBar, make sure that you use screws of a  
suitable length and diameter.  
3 - 3.5mm  
> 25mm  
For information about how to wall mount your  
SoundBar, see the quick start guide.  
EN 11  
 
Bluetooth  
6 Product  
specifications  
Bluetooth profiles:A2DP  
Bluetooth version: 2.1 + EDR  
Main unit  
Power supply: 220-240V~, 50 Hz  
Note  
Power consumption: 40 W  
Standby power consumption: ≤ 0.5 W  
Speaker impedance: 8 ohm (full range)  
Speaker drivers: 4 x 54.5 mm (2")  
Dimensions (WxHxD):  
Specifications and design are subject to change without  
notice.  
845 x 74.5 x 94 mm  
Weight: 2.0 kg  
Amplifier  
Total output power: 40W RMS (+/- 0.5 dB,  
10%THD)  
Frequency response: 20 Hz-20 kHz /  
±3 dB  
Signal-to-noise ratio: > 65 dB (CCIR) /  
(A-weighted)  
Input sensitivity:  
Operating temperature and humidity:  
0°C to 45°C, 5% to 90% Humidity for all  
climates  
Storage temperature and humidity: -40 °C  
to 70 °C, 5% to 95%  
Remote control batteries  
AUX: 2Vrms  
AUDIO IN: 1Vrms  
1 x CR2025  
Audio  
S/PDIF Digital audio input:  
Coaxial: IEC 60958-3  
Optical:TOSLINK  
Sampling frequency:  
MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22  
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz  
WMA: 44.1 kHz, 48 kHz  
Constant bit rate:  
MP3: 8 kbps-320 kbps  
WMA: 64 kbps-192 kbps  
Version:  
WMA:V7,V8,V9  
USB  
Compatibility: Hi-Speed USB (2.0)  
Class support: USB Mass Storage Class  
(MSC)  
File system: FAT16 and FAT32  
Supports MP3 and WMA file formats  
12 EN  
 
Quality of audio play from a connected  
Bluetooth device is poor.  
7 Troubleshooting  
The Bluetooth reception is poor. Move the  
device closer to the SoundBar, or remove  
any obstacle between the device and the  
SoundBar.  
Warning  
The connected Bluetooth device connects and  
disconnects constantly.  
Risk of electric shock. Never remove the casing of the  
product.  
The Bluetooth reception is poor. Move the  
device closer to the SoundBar, or remove  
any obstacle between the device and the  
SoundBar.  
To keep the warranty valid, never try to repair  
the product yourself.  
If you have problems using this product, check  
the following points before you request service.  
If you still have a problem, get support at www.  
philips.com/support.  
Turn off Wi-Fi function on the Bluetooth  
device to avoid interference.  
For some Bluetooth, the Bluetooth  
connection can be deactivated  
automatically to save power.This does not  
indicate any malfunction of the SoundBar.  
Sound  
No sound from SoundBar speakers.  
Connect the audio cable from your  
SoundBar to yourTV or other devices.  
Reset your SoundBar to its factory settings.  
On the remote control, select the correct  
audio input.  
Make sure that the SoundBar is not muted.  
Distorted sound or echo.  
If you play audio from theTV through the  
SoundBar, make sure that theTV is muted.  
Bluetooth  
A device cannot connect with the SoundBar.  
The device does not support the  
compatible profiles required for the  
SoundBar.  
You have not enabled the Bluetooth  
function of the device. See the user manual  
of the device on how to enable the  
function.  
The device is not correctly connected.  
audio through Bluetooth' on page 10)  
The SoundBar is already connected with  
another Bluetooth device. Disconnect the  
connected device, then try again.  
EN 13  
 
Specifications are subject to change without notice  
2013 ©WOOX Innovations Limited.All rights reserved.  
Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.  
and are used byWOOX Innovations Limited under license from Koninklijke Philips N.V.  
HTL2111A_12_UM_V1.0  
 

Paxar Printer TC6035AN User Manual
Peerless Industries TV Mount SF670 User Manual
Pelco Home Security System C2477M 6 03 User Manual
Pentax Home Safety Product AF540FGZ User Manual
Philips DVD Player DVD701 User Manual
Philips Home Security System SBCSC490 User Manual
Philips Mouse MWK350BK User Manual
Philips Power Supply LR6PB4C User Manual
Philips Two Way Radio 26PF7521D User Manual
PYLE Audio Car Stereo System PLHR58 User Manual